UT 6050 HS Hot Set oven with glass observation and opto-electronic laser system.
Optional available with air flow meter & regulator and labtop.
No compressed air required to operate this oven

PTL-Vision 6050 HS is the Hot Set oven with a vision

Principle:
The conventional PTL-UT 6050 HS Hot Set oven measures the hot set elongation by means of an optical laser mounted on a measurement scale on the door. Measurement will be made through the window on the door. The manual system requires labor and personal attention. The measured values can be entered in an Excel template.

The new upgraded PTL-Vision 6050 HS Hot Set oven does require minimal labor. You simply put the samples in the oven and the installed system will do the job for you. As soon as the door is closed a PC controlled digital camera will take a picture of the samples. After completion of a test cycle of usually 15 minutes, the camera will make a picture again. The PC will store the pictures on the hard disc and calculate the elongation under load in accordance with IEC 60811-2-1 and enter this information in the PC. The oven will be supplied with a laptop and the required soft ware is integrated in the system.

No compressed air required to operate this oven.

UT 6050 HS hot-set elongation oven

The UT 6050 HS test oven has been designed for hot-set tests that demand a maximum of accuracy and reproducibility under well-controlled temperature and air conditions. This test oven ensures a homogeneous temperature structure with a deviation of +/- 3ºC in the region of the test piece up to a nominal temperature of 250ºC.

The air conduction system allows a short recovery period once the door has been opened. The large (380 mm x 380 mm) glass observation panel in the door is essential to detect high thermal stretching values.

The heating oven with opto-electronic laser allows rapid measurement of thermal stretching and degree of crosslinking with high reproducibility and accuracy.